5 3 ⁄ 4" 5 - 6 Lobe
Horizontal Boring MotorCall for Price
Motors are subject to price quote.PSI:
GPM:
Rig Size:
Bit Size:
No Load: 350PSI
220-300
D220X300 | D330X500
7 7⁄8" - 8 3⁄4"
With Load: 550PSI
DD-220T
All Adtech Drilling Motors are specifically designed for the Horizontal Boring Industry.
The 5 3⁄4” 5-6 Lobe Motor is just a step down size from the 6 1⁄2” 6-7 Lobe Motor. It's used on rigs that have pumps that generate 200 - 250 GPM and where you would like to run a 7 7⁄8” Drill Bit. This setup steers really good and lines up with a 220 Vermeer Drilling Rig.
Each of Adtech's motors have a sealed bearing pack to keep oil on the bearing for a smoother run.
| Rotor | 5 Lobes |
| Major Diameter (in): | 3.415" |
| Eccentricity (in): | 0.33" |
| Contour Length (in): | 102" |
| Overall (in): | 114" |
| Lead (in): | 22.857" |
| Head Diameter (in): | 3" |
| Material: | 4140 HT |
| Weight (lb): | ~970 |
| Stator: | 6 Lobes |
| OD (in): | 5.75"-6" |
| ID (in): | 4.5" |
| Overall Length (in): | 120" |
| Cutback (in): | 7" |
| Lead (in): | 27.429" |
| Minor Diameter (in): | 2.735" |
| Material: | 4142 CD |
| Stages: | 3.9 |
