5" 7:8 2.6 Stage
The 5” 7-8 Lobe Motor is a heavy duty 4 3⁄4” drilling motor. A thick walled stator and an oversized bearing pack makes this tool a good match for machines that have 160 – 250 GPM. The 7-8 lobe is a slower turning configuration with medium-high torque that’s used in hard rock formations.
Stator and Rotor sizes are subject to change at the discretion of Adtech. Power section specifications may vary due to environmental conditions. Operation of power section above the maximum recommended differential pressure will result in a decrease of stator life and performance.
