8" 6:7 4 Stage
The 8” 6-7 Lobe Motor was designed to drill with plenty of torque at lower GPM’s. This 6-7 lobe motor will run on 250 GPM. Most operators run this tool in the 350 GPM area with 8000 ft-lb. torque. It is shorter than an oilfield tool at about 24’ and is a favorite of the customers who have drilling rigs to run this particular model.
Stator and Rotor sizes are subject to change at the discretion of Adtech. Power section specifications may vary due to environmental conditions. Operation of power section above the maximum recommended differential pressure will result in a decrease of stator life and performance.
